SurfaceDescriptionInputs BuildSurfaceDescriptionInputs(Varyings input)
{
SurfaceDescriptionInputs output;
ZERO_INITIALIZE(SurfaceDescriptionInputs, output);
$splice(CustomInterpolatorCopyToSDI)
$SurfaceDescriptionInputs.WorldSpaceNormal: // must use interpolated tangent, bitangent and normal before they are normalized in the pixel shader.
$SurfaceDescriptionInputs.WorldSpaceNormal: float3 unnormalizedNormalWS = input.normalWS;
$SurfaceDescriptionInputs.WorldSpaceNormal: const float renormFactor = 1.0 / length(unnormalizedNormalWS);
$SurfaceDescriptionInputs.WorldSpaceBiTangent: // use bitangent on the fly like in hdrp
$SurfaceDescriptionInputs.WorldSpaceBiTangent: // IMPORTANT! If we ever support Flip on double sided materials ensure bitangent and tangent are NOT flipped.
$SurfaceDescriptionInputs.WorldSpaceBiTangent: float crossSign = (input.tangentWS.w > 0.0 ? 1.0 : -1.0) * GetOddNegativeScale();
$SurfaceDescriptionInputs.WorldSpaceBiTangent: float3 bitang = crossSign * cross(input.normalWS.xyz, input.tangentWS.xyz);
$SurfaceDescriptionInputs.WorldSpaceNormal: output.WorldSpaceNormal = renormFactor*input.normalWS.xyz; // we want a unit length Normal Vector node in shader graph
$SurfaceDescriptionInputs.ObjectSpaceNormal: output.ObjectSpaceNormal = normalize(mul(output.WorldSpaceNormal, (float3x3) UNITY_MATRIX_M)); // transposed multiplication by inverse matrix to handle normal scale
$SurfaceDescriptionInputs.ViewSpaceNormal: output.ViewSpaceNormal = mul(output.WorldSpaceNormal, (float3x3) UNITY_MATRIX_I_V); // transposed multiplication by inverse matrix to handle normal scale
$SurfaceDescriptionInputs.TangentSpaceNormal: output.TangentSpaceNormal = float3(0.0f, 0.0f, 1.0f);
$SurfaceDescriptionInputs.WorldSpaceTangent: // to preserve mikktspace compliance we use same scale renormFactor as was used on the normal.
$SurfaceDescriptionInputs.WorldSpaceTangent: // This is explained in section 2.2 in "surface gradient based bump mapping framework"
$SurfaceDescriptionInputs.WorldSpaceTangent: output.WorldSpaceTangent = renormFactor*input.tangentWS.xyz;
$SurfaceDescriptionInputs.WorldSpaceBiTangent: output.WorldSpaceBiTangent = renormFactor*bitang;
$SurfaceDescriptionInputs.ObjectSpaceTangent: output.ObjectSpaceTangent = TransformWorldToObjectDir(output.WorldSpaceTangent);
$SurfaceDescriptionInputs.ViewSpaceTangent: output.ViewSpaceTangent = TransformWorldToViewDir(output.WorldSpaceTangent);
$SurfaceDescriptionInputs.TangentSpaceTangent: output.TangentSpaceTangent = float3(1.0f, 0.0f, 0.0f);
$SurfaceDescriptionInputs.ObjectSpaceBiTangent: output.ObjectSpaceBiTangent = TransformWorldToObjectDir(output.WorldSpaceBiTangent);
$SurfaceDescriptionInputs.ViewSpaceBiTangent: output.ViewSpaceBiTangent = TransformWorldToViewDir(output.WorldSpaceBiTangent);
$SurfaceDescriptionInputs.TangentSpaceBiTangent: output.TangentSpaceBiTangent = float3(0.0f, 1.0f, 0.0f);
$SurfaceDescriptionInputs.WorldSpaceViewDirection: output.WorldSpaceViewDirection = GetWorldSpaceNormalizeViewDir(input.positionWS);
$SurfaceDescriptionInputs.ObjectSpaceViewDirection: output.ObjectSpaceViewDirection = TransformWorldToObjectDir(output.WorldSpaceViewDirection);
$SurfaceDescriptionInputs.ViewSpaceViewDirection: output.ViewSpaceViewDirection = TransformWorldToViewDir(output.WorldSpaceViewDirection);
$SurfaceDescriptionInputs.TangentSpaceViewDirection: float3x3 tangentSpaceTransform = float3x3(output.WorldSpaceTangent,output.WorldSpaceBiTangent,output.WorldSpaceNormal);
$SurfaceDescriptionInputs.TangentSpaceViewDirection: output.TangentSpaceViewDirection = TransformWorldToTangent(output.WorldSpaceViewDirection, tangentSpaceTransform);
$SurfaceDescriptionInputs.WorldSpacePosition: output.WorldSpacePosition = input.positionWS;
$SurfaceDescriptionInputs.ObjectSpacePosition: output.ObjectSpacePosition = TransformWorldToObject(input.positionWS);
$SurfaceDescriptionInputs.ViewSpacePosition: output.ViewSpacePosition = TransformWorldToView(input.positionWS);
$SurfaceDescriptionInputs.TangentSpacePosition: output.TangentSpacePosition = float3(0.0f, 0.0f, 0.0f);
$SurfaceDescriptionInputs.AbsoluteWorldSpacePosition: output.AbsoluteWorldSpacePosition = GetAbsolutePositionWS(input.positionWS);
$SurfaceDescriptionInputs.WorldSpacePositionPredisplacement: output.WorldSpacePositionPredisplacement = input.positionPredisplacementWS;
$SurfaceDescriptionInputs.ObjectSpacePositionPredisplacement: output.ObjectSpacePositionPredisplacement = TransformWorldToObject(input.positionPredisplacementWS);
$SurfaceDescriptionInputs.ViewSpacePositionPredisplacement: output.ViewSpacePositionPredisplacement = TransformWorldToView(input.positionPredisplacementWS);
$SurfaceDescriptionInputs.TangentSpacePositionPredisplacement: output.TangentSpacePositionPredisplacement = float3(0.0f, 0.0f, 0.0f);
$SurfaceDescriptionInputs.AbsoluteWorldSpacePositionPredisplacement:output.AbsoluteWorldSpacePositionPredisplacement = GetAbsolutePositionWS(input.positionPredisplacementWS);
$SurfaceDescriptionInputs.ScreenPosition: output.ScreenPosition = ComputeScreenPos(TransformWorldToHClip(input.positionWS), _ProjectionParams.x);
#if UNITY_UV_STARTS_AT_TOP
$SurfaceDescriptionInputs.PixelPosition: output.PixelPosition = float2(input.positionCS.x, (_ProjectionParams.x < 0) ? (_ScreenParams.y - input.positionCS.y) : input.positionCS.y);
#else
$SurfaceDescriptionInputs.PixelPosition: output.PixelPosition = float2(input.positionCS.x, (_ProjectionParams.x > 0) ? (_ScreenParams.y - input.positionCS.y) : input.positionCS.y);
#endif
$SurfaceDescriptionInputs.NDCPosition: output.NDCPosition = output.PixelPosition.xy / _ScreenParams.xy;
$SurfaceDescriptionInputs.NDCPosition: output.NDCPosition.y = 1.0f - output.NDCPosition.y;
#if defined(UNITY_UIE_INCLUDED)
$SurfaceDescriptionInputs.uv0: output.uv0 = float4(input.texCoord0.x, input.texCoord0.y, 0, 0);
$SurfaceDescriptionInputs.uv1: output.uv1 = float4(0, 0, 0, 0);
$SurfaceDescriptionInputs.uv2: output.uv2 = float4(0, 0, 0, 0);
$SurfaceDescriptionInputs.uv3: output.uv3 = float4(0, 0, 0, 0);
$SurfaceDescriptionInputs.uv4: output.uv4 = float4(0, 0, 0, 0);
$SurfaceDescriptionInputs.uv5: output.uv5 = float4(0, 0, 0, 0);
$SurfaceDescriptionInputs.uv6: output.uv6 = float4(0, 0, 0, 0);
$SurfaceDescriptionInputs.uv7: output.uv7 = float4(0, 0, 0, 0);
#else
$SurfaceDescriptionInputs.uv0: output.uv0 = input.texCoord0;
$SurfaceDescriptionInputs.uv1: output.uv1 = input.texCoord1;
$SurfaceDescriptionInputs.uv2: output.uv2 = input.texCoord2;
$SurfaceDescriptionInputs.uv3: output.uv3 = input.texCoord3;
$SurfaceDescriptionInputs.uv4: output.uv4 = input.texCoord4;
$SurfaceDescriptionInputs.uv5: output.uv5 = input.texCoord5;
$SurfaceDescriptionInputs.uv6: output.uv6 = input.texCoord6;
$SurfaceDescriptionInputs.uv7: output.uv7 = input.texCoord7;
#endif
$SurfaceDescriptionInputs.VertexColor: output.VertexColor = input.color;
$SurfaceDescriptionInputs.VertexID: output.VertexID = input.vertexID;
$SurfaceDescriptionInputs.color: output.color = input.color;
$SurfaceDescriptionInputs.uvClip: output.uvClip = input.texCoord0;
$SurfaceDescriptionInputs.typeTexSettings: output.typeTexSettings = input.texCoord1;
$SurfaceDescriptionInputs.textCoreLoc: output.textCoreLoc = input.texCoord3.xy;
$SurfaceDescriptionInputs.layoutUV: output.layoutUV = input.texCoord3.zw;
$SurfaceDescriptionInputs.circle: output.circle = input.texCoord4;
#if UNITY_ANY_INSTANCING_ENABLED
$SurfaceDescriptionInputs.InstanceID: output.InstanceID = unity_InstanceID;
#else // TODO: XR support for procedural instancing because in this case UNITY_ANY_INSTANCING_ENABLED is not defined and instanceID is incorrect.
$SurfaceDescriptionInputs.InstanceID: output.InstanceID = input.instanceID;
#endif
$SurfaceDescriptionInputs.TimeParameters: output.TimeParameters = _TimeParameters.xyz; // This is mainly for LW as HD overwrite this value
#if defined(SHADER_STAGE_FRAGMENT) && defined(VARYINGS_NEED_CULLFACE)
#define BUILD_SURFACE_DESCRIPTION_INPUTS_OUTPUT_FACESIGN output.FaceSign = IS_FRONT_VFACE(input.cullFace, true, false);
#else
#define BUILD_SURFACE_DESCRIPTION_INPUTS_OUTPUT_FACESIGN
#endif
$SurfaceDescriptionInputs.FaceSign: BUILD_SURFACE_DESCRIPTION_INPUTS_OUTPUT_FACESIGN
#undef BUILD_SURFACE_DESCRIPTION_INPUTS_OUTPUT_FACESIGN
return output;
}