#!/usr/bin/env bash
#encoding=utf8

function echo_block() {
    echo "----------------------------"
    echo $1
    echo "----------------------------"
}
UV=false
# Supported Python minor versions (order matters for detection)
SUPPORTED_MINOR_VERS=(14 13 12 11)
SUPPORTED_PY_VERSIONS="3.11, 3.12, 3.13 and 3.14"

function check_installed_pip() {
   ${PYTHON} -m pip > /dev/null
   if [ $? -ne 0 ]; then
        echo_block "Installing Pip for ${PYTHON}"
        curl https://bootstrap.pypa.io/get-pip.py -s -o get-pip.py
        ${PYTHON} get-pip.py
        rm get-pip.py
   fi
}

# Check which python version is installed
function check_installed_python() {
    if [ -n "${VIRTUAL_ENV}" ]; then
        echo "Please deactivate your virtual environment before running setup.sh."
        echo "You can do this by running 'deactivate'."
        exit 2
    fi
    if [ -x "$(command -v uv)" ]; then
        echo "uv detected — using it instead of pip for faster installation."
        PIP="uv pip"
        PYTHON="python3.13"
        UV=true
        return
    fi

    for v in "${SUPPORTED_MINOR_VERS[@]}"
    do
        PYTHON="python3.${v}"
        which $PYTHON
        if [ $? -eq 0 ]; then
            echo "using ${PYTHON}"
            check_installed_pip
            PIP="${PYTHON} -m pip"
            return
        fi
    done

    echo "No usable python found. Supported versions are: ${SUPPORTED_PY_VERSIONS}. Please install one of these."
    exit 1
}

function updateenv() {
    echo_block "Updating your virtual environment"
    if [ ! -f .venv/bin/activate ]; then
        echo "Something went wrong, no virtual environment found."
        exit 1
    fi
    source .venv/bin/activate
    SYS_ARCH=$(uname -m)
    echo "pip install in-progress. Please wait..."
    ${PIP} install --upgrade pip wheel setuptools
    REQUIREMENTS_HYPEROPT=""
    REQUIREMENTS_PLOT=""
    REQUIREMENTS_FREQAI=""
    REQUIREMENTS_FREQAI_RL=""
    REQUIREMENTS=requirements.txt

    read -p "Do you want to install dependencies for development (Performs a full install with all dependencies) [y/N]? "
    dev=$REPLY
    if [[ $REPLY =~ ^[Yy]$ ]]
    then
        REQUIREMENTS=requirements-dev.txt
    else
        # requirements-dev.txt includes all the below requirements already, so further questions are pointless.
        read -p "Do you want to install plotting dependencies (plotly) [y/N]? "
        if [[ $REPLY =~ ^[Yy]$ ]]
        then
            REQUIREMENTS_PLOT="-r requirements-plot.txt"
        fi
        if [ "${SYS_ARCH}" == "armv7l" ] || [ "${SYS_ARCH}" == "armv6l" ]; then
            echo "Detected Raspberry, installing cython, skipping hyperopt installation."
            ${PIP} install --upgrade cython
        else
            # Is not Raspberry
            read -p "Do you want to install hyperopt dependencies [y/N]? "
            if [[ $REPLY =~ ^[Yy]$ ]]
            then
                REQUIREMENTS_HYPEROPT="-r requirements-hyperopt.txt"
            fi
        fi

        read -p "Do you want to install dependencies for freqai [y/N]? "
        if [[ $REPLY =~ ^[Yy]$ ]]
        then
            REQUIREMENTS_FREQAI="-r requirements-freqai.txt"
            read -p "Do you also want dependencies for freqai-rl or PyTorch (~700mb additional space required) [y/N]? "
            if [[ $REPLY =~ ^[Yy]$ ]]
            then
                REQUIREMENTS_FREQAI="-r requirements-freqai-rl.txt"
            fi
        fi
    fi

    ${PIP} install --upgrade -r ${REQUIREMENTS} ${REQUIREMENTS_HYPEROPT} ${REQUIREMENTS_PLOT} ${REQUIREMENTS_FREQAI} ${REQUIREMENTS_FREQAI_RL}
    if [ $? -ne 0 ]; then
        echo "Failed installing dependencies"
        exit 1
    fi
    ${PIP} install -e .
    if [ $? -ne 0 ]; then
        echo "Failed installing Freqtrade"
        exit 1
    fi

    echo "Installing freqUI"
    freqtrade install-ui

    echo "pip install completed"
    echo
    if [[ $dev =~ ^[Yy]$ ]]; then
        ${PYTHON} -m pre_commit install
        if [ $? -ne 0 ]; then
            echo "Failed installing pre-commit"
            exit 1
        fi
    fi
}

# Install bot MacOS
function install_macos() {
    if [ ! -x "$(command -v brew)" ]
    then
        echo_block "Installing Brew"
        /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    fi

    brew install gettext libomp

    #Gets number after decimal in python version
    version=$(egrep -o 3.\[0-9\]+ <<< $PYTHON | sed 's/3.//g')
}

# Install bot Debian_ubuntu
function install_debian() {
    sudo apt-get update
    sudo apt-get install -y gcc build-essential autoconf libtool pkg-config make wget git curl $(echo lib${PYTHON}-dev ${PYTHON}-venv)
}

# Install bot RedHat_CentOS
function install_redhat() {
    sudo yum update
    sudo yum install -y gcc gcc-c++ make autoconf libtool pkg-config wget git $(echo ${PYTHON}-devel | sed 's/\.//g')
}

# Upgrade the bot
function update() {
    git pull
    if [ -f .env/bin/activate  ]; then
        # Old environment found - updating to new environment.
        recreate_environments
    fi
    updateenv
    echo "Update completed."
    echo_block "Don't forget to activate your virtual environment with 'source .venv/bin/activate'!"

}

function check_git_changes() {
    if [ -z "$(git status --porcelain)" ]; then
        echo "No changes in git directory"
        return 1
    else
        echo "Changes in git directory"
        return 0
    fi
}

function recreate_environments() {
    if [ -d ".env" ]; then
        # Remove old virtual env
        echo "- Deleting your previous virtual env"
        echo "Warning: Your new environment will be at .venv!"
        rm -rf .env
    fi
    if [ -d ".venv" ]; then
        echo "- Deleting your previous virtual env"
        rm -rf .venv
    fi

    echo
    if [ "$UV" = true ] ; then
        echo "- Creating new virtual environment with uv"
        uv venv .venv --python=${PYTHON}
    else
        ${PYTHON} -m venv .venv
    fi
    if [ $? -ne 0 ]; then
        echo "Could not create virtual environment. Leaving now"
        exit 1
    fi

}

# Reset Develop or Stable branch
function reset() {
    echo_block "Resetting branch and virtual env"

    if [ "1" == $(git branch -vv |grep -cE "\* develop|\* stable") ]
    then
        if check_git_changes; then
            read -p "Keep your local changes? (Otherwise will remove all changes you made!) [Y/n]? "
            if [[ $REPLY =~ ^[Nn]$ ]]; then

                git fetch -a

                if [ "1" == $(git branch -vv | grep -c "* develop") ]
                then
                    echo "- Hard resetting of 'develop' branch."
                    git reset --hard origin/develop
                elif [ "1" == $(git branch -vv | grep -c "* stable") ]
                then
                    echo "- Hard resetting of 'stable' branch."
                    git reset --hard origin/stable
                fi
            fi
        fi
    else
        echo "Reset ignored because you are not on 'stable' or 'develop'."
    fi
    recreate_environments

    updateenv
}

function config() {
    echo_block "Please use 'freqtrade new-config -c user_data/config.json' to generate a new configuration file."
}

function install() {

    echo_block "Installing mandatory dependencies"

    if [ "$(uname -s)" == "Darwin" ]; then
        echo "macOS detected. Setup for this system in-progress"
        install_macos
    elif [ -x "$(command -v apt-get)" ]; then
        echo "Debian/Ubuntu detected. Setup for this system in-progress"
        install_debian
    elif [ -x "$(command -v yum)" ]; then
        echo "Red Hat/CentOS detected. Setup for this system in-progress"
        install_redhat
    else
        echo "This script does not support your OS."
        echo "If you have Python version 3.11 - 3.14, pip, virtualenv installed you can continue."
        echo "Wait 10 seconds to continue the next install steps or use ctrl+c to interrupt this shell."
        sleep 10
    fi
    echo
    reset
    config
    echo_block "Run the bot !"
    echo "You can now use the bot by executing 'source .venv/bin/activate; freqtrade <subcommand>'."
    echo "You can see the list of available bot sub-commands by executing 'source .venv/bin/activate; freqtrade --help'."
    echo "You verify that freqtrade is installed successfully by running 'source .venv/bin/activate; freqtrade --version'."
}

function plot() {
    echo_block "Installing dependencies for Plotting scripts"
    ${PIP} install plotly --upgrade
}

function help() {
    echo "usage:"
    echo "	-i,--install    Install freqtrade from scratch"
    echo "	-u,--update     Command git pull to update."
    echo "	-r,--reset      Hard reset your develop/stable branch."
    echo "	-c,--config     Easy config generator (Will override your existing file)."
    echo "	-p,--plot       Install dependencies for Plotting scripts."
}

# Verify if 3.11+ is installed
check_installed_python

case $* in
--install|-i)
install
;;
--config|-c)
config
;;
--update|-u)
update
;;
--reset|-r)
reset
;;
--plot|-p)
plot
;;
*)
help
;;
esac
exit 0